UHP04 SmartNET is a 1-channel controller intended to use in single loop control solutions. All kind of measurement modes are settable by software tool. UHP04SmartNET has 4 relay Outputs (or Solid State Relays) and two Analog 0(4) -20mA Outputs. Display of the controller is LCD 128×64 dots with backlight. The Controller is compatible with SCADA systems.


Function modes: On/Off, Three position regulator, PID, Process indicator and Totalizer
Auto tuning function: For all PID
Display : LED Seven segments, 5 digits 20 mm, brightness control
Bargraff: 20 LEDs
Analog Inputs: Two – Pt100, Cu50, Cu53, TC – J, K, S, T, Current 0 (4) – 20 mA
Input Sensor malfunction: Display message alert
Pulse Inputs: Two – Low frequency and one – Hi Frequency
Relay Outputs: Three relays –5A /250V or Solid State relays – 10A/250V
Analog Outputs: One – 0(4)-20 mA
Accuracy Analog Output: 0.5%
Real Time Clock: Date and time
Accuracy: 0.1%
Reputability: 0.01%
Serial Port: RS232/485/422
Protocol: Modbus RTU
Dimensions: 96x96x119
Power supply: 80-265V AC/DC
Power down detector: 500 mS delay before data save
Settings: By Software tool or manually by Front panel buttons

Configuration software